Wavetronix Command Collector (CMD-DCx) - User Guide - Manual (Page 35)

34 CHAPTER 4 • SENSOR TOOLBAR
Note
Some toolbar buttons may not be visible to users who do not have authorization to
perform certain functions.
Add Sensors
The Add Sensors button displays the Add Sensors page, where you can add sensors to
Collector. Using ranges or address books, the Add Sensor page allows you to add a large
number of sensors at one time (see Figure 4.2).
Figure 4.2 – Add Sensor Page
Follow the steps below to add a sensor or group of sensors:
1 Select a sensor type from the Sensor Type drop-down list. The Sensor Type drop-
down list contains every sensor driver registered on the system. Choose the driver that
will be used to communicate with the sensor.
Note
Some sensor brands may have more than one driver for different circumstances,
such as different communication protocols or other unique distinctions. Consult
individual driver documentation for specifics on driver differences within brands.