Wavetronix Command Collector (CMD-DCx) - User Guide - Manual (Page 109)

108 CHAPTER 9 • DRIVER REFERENCE
Figure 9.1 – TMDD Information Panel
The TMDD panel has the following fields:
˽ Latitude – Allows you to enter either North or South, degrees, minutes, and seconds of
the latitude coordinates of the sensor.
˽ Longitude – Allows you to enter either East or West, degrees, minutes, and seconds of
the longitude coordinates of the sensor.
Note
Some SmartSensor HD sensors include GPS information (Latitude and Longitude)
or route names (highway designations such as US-45, I-15, etc.) embedded in the
Location/Description strings. If Collector is unable to recognize the embedded Loca-
tion/Description strings, the user-defined GPS information from this control will be
displayed.
˽ Datum – Used to calculate the latitude and longitude coordinates.
˽ Route Name – Used to report this sensor as part of a route.
˽ Owner – Used in TMDD reports.
˽ Station Name – Used in TMDD reports.
˽ Mile Marker – The Highway mile marker nearest the sensor’s location for TMDD re-
ports.
Wavetronix SmartSensor HD (SS125)
The Wavetronix SmartSensor HD (SS125) is a high definition radar device that uses dual-
radar speed technology to provide highly accurate, per-vehicle speed data (see Figure 9.2).