Visara VI-5990 - Manual (Page 9)

VI-5990 Installation and Configuration Manual
707166-001 1-3
Initial Installation
Installation of the VI-5990 consists of multiple steps, and may involve more than one
person. The VI-5990 can be locally or remotely configured. Tasks required to complete
an installation include:
1. Mounting the hardware platform (if desired) in a rack or placing the platform
within the necessary proximity of all of the network connections required to
satisfy the configuration. The VI-5990A requires a 3U space when mounted in
a rack, and the VI-5990L requires a 4U space.
2. Cabling the unit for power, FICON, and Ethernet connections as needed.
Locally configuring:
3.
Attach monitor, mouse, and keyboard directly to the unit.
4. Once booted, select Start>Programs>Firefox.
Remotely configuring:
3.
Editing the VTA.ini file if necessary to provide access to a web browser
capable platform, such as a PC, or change the IP address on a web browser
capable platform to be compatible to the VI-5990 default address.
4. Powering up the unit with a USB drive containing the VTA.ini file.
5. Connect to the platform with a web browser to finish the configuration.
Chassis Installation
Tools needed:
1. Phillips Screw Driver
2. Antistatic Strap
Installing Chassis Rails:
Please make sure that the chassis covers and chassis rails are installed on the chassis
before you install the chassis into the rack.
To avoid personal injury and property damage, please follow all the safety steps listed
below.
Before installing the chassis rails:
1. Enclose the chassis with chassis covers.
2. Unplug the AC power cord(s).
3. Remove all external devices and connectors.