Dlci statistics screen, Dlci statistics screen -41 – Verilink WANsuite 7205 (34-00317.B) Product Manual User Manual
Page 163
V T 1 0 0 I n t e r f a c e
4-41
UAS Threshold
Sets the Unavailable Seconds (UAS) alarm threshold. This threshold is the
number of seconds after which the DLCI is unavailable. Setting this field to
“0” (zero) disables the alarm.
UAS Alarm
Reports if the UAS threshold has been exceeded.
DLCI Statistics Screen
Selecting “DLCI Statistics” on the Endpoint DLCI Details screen will display
the screen shown in (Figure 4.33).
Figure 4.33
DLCI Statistics Screen
This screen displays all ninety-six 15-minute buckets (sampled every second)
available for DLCI statistics. If the unit is powered on at 01:00 PM, the first
interval will be completed at 01:15 PM; subsequent intervals would be
completed at xx:30, xx:45, xx:00 and xx:15. Interval 1 is always the latest
(most recent) interval, and interval 96 will always be the oldest.
The first row of the DLCI Statistics screen shows a summary that includes all
96 buckets. You can choose to see the statistics for any given bucket by
selecting the desired
(ipadv2.mib) describes each available statistic.
DLCI Statistics Details Screen
Select from the
(Figure 4.34) for a specific period or interval. The parameters on this screen
are described below.