Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 120)

3-90 W A N s u i t e 7 2 0 5
Password
The Password screen (Figure 3.85) is used to modify the password that
restricts access to the Web server interface.
Acceptable characters for use in a password are digits 0–9 and letters A–Z
and a–z, for a total of 62 distinct characters.
Figure 3.85 Password Screen
To change the password, you must enter it once in the New Password field
and then re-enter the same password in the Confirm Password field. After
entering the new password in both these fields, click the “Change Password”
button to update and establish the new password.
NOTICE: Remember that passwords are case-sensitive. When logging on,
password must be entered exactly as it was programmed.
Log Out
The Log Out screen (Figure 3.86) is used to log the current user off of the
Web server. The Log Out function is only available after user password
protection has been set. You will be automatically logged out of the system
1 hour after you log on using a password to gain access; after this, you will be
required to enter the password to gain write access.
Figure 3.86 Log Out Screen