Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 108)

3-78 W A N s u i t e 7 2 0 5
Secondary DNS IP
Addr
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
The DHCP Server Details screen provides the following user-activated
buttons:
DHCP Hosts Screen
In some cases, it may be necessary to provide an IP station with a specific
DHCP server name, which may be used by the IP station when making a
DHCP request. That name is included on the DHCP Hosts screen (Figure
3.69), which identifies the DHCP server sending DHCP packets. This
parameter is configured on the DHCP Hosts Details screen accessed by
clicking on an “Index” number.
Figure 3.69 DHCP Hosts Screen
Host Name The name of the DHCP Server. Default is none.
The DHCP Hosts screen provides the following user-activated buttons:
NOTICE: You must Save and Restart for the new Server name to become active.
Button Function
Submit Sets any values that have been changed.
Host Table Lists Host names (DHCP server identification).
Static Entry Table Creates a list of static IP addresses associated with MAC
addresses.
IP Address List Table Defines the addresses available for DHCP clients.
IP Address Status Table Displays DHCP Server statistics.
Refresh Refreshes data on the current page.
Button Function
DHCP Details Returns the user to the previous screen.
Add New Adds a new Server name.
Refresh Refreshes data on the current page.