Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 142)

4-20 W A N s u i t e 7 2 0 5
DS0 Status and Alarm Table
Each second, the TDM services will count the number of active DS0s and
update their statistics. This table also gives the status (OK, Alarmed) of the
alarms related to DS0s.
The user-activated prompts listed below are at the bottom of the DS0 Monitor
Details screen.
Figure 4.16 Channel Table Details Screen
The Channel Table Details screen lets you establish the Rate, Service, Pair,
and Idle Pattern parameters for any available channel. The screen parameters
are described below.
Rate The unit can operate at any data rate that is a multiple of 56 or 64 kbps.
Values: 56K, 64K
Default: 64K
Service Specifies the service to which this channel is allocated. Refer to the Service
Table to see how the current services are configured.
Pair Channel number from paired service.
Values: 0
−
31
Default: Current channel number
Prompt Function
Clear Alarms Clears all utilization alarms.
Channels Displays the channel table details for the Network 1, Network
2, or Network 3 services (Figure 4.16).
DS0 24 Hour History Displays DS0 utilization history in 15-min buckets for the
past 24 hours (Figure 4.17).
DS0 30 Day History Displays DS0 utilization history in 24-hr buckets for the past
30 days (Figure 4.18).