Verilink WANsuite 7205 (34-00317.B) Product Manual - Manual (Page 110)

3-80 W A N s u i t e 7 2 0 5
Start Starting IP Address of the DHCP client pool.
End Ending IP Address of the DHCP client pool.
Subnet Mask Subnet Mask associated with the defined range.
Exclude Start Beginning of “excluded” range.
Exclude End End of “excluded” range.
The IP Address List screen provides the following user-activated buttons:
IP Address Status Screen
The IP Address Status screen (Figure 3.72) displays a list of all current DHCP
clients.
Figure 3.72 IP Address Status Screen
MAC Address MAC Address of this DHCP client.
IP Address IP Address given to this DHCP client if that client has the MAC Address
defined on this screen.
Status Provides IP Address Status.
HDLC Monitor Table Screen
The HDLC Monitor Table screen (Figure 3.73) lets you view the status of
HDLC utilization and alarms based on user-specified configuration in the
HDLC Monitor Details screen (Figure 3.74). This helps determine customer
load patterns so that channel bandwidth can be reallocated as necessary. The
parameters on the screen are described below.
Button Function
DHCP Details Returns the user to the previous screen.
Add New Lets the user add an additional IP address.
Refresh Refreshes data on the current page.