Teac DP-006 - Manual (Page 94)

94
TASCAM DP-006
14 – Message Lists
The following popup messages alert you to conditions that may arise while you are using the unit. Consult this table if you see something you do not understand.
Messages Meaning and remedy
Battery Empty
The batteries have no remaining charge.
This appears when the batteries have no remaining charge.
Replace the batteries with new ones or use a TASCAM PS-P520 AC adapter (sold separately).
Battery Low
The batteries have little remaining charge.
This appears if you try to start recording when the batteries are low.
Replace the batteries with new ones or use a TASCAM PS-P520 AC adapter (sold separately).
Card Full
The SD card is full during recording.
Export or delete unneeded data to make room on the card or use a different SD card.
Empty Export Track
There is no recorded data for the export track.
This appears if you tried to export a track from the song that does not have any recordings. (See “Track import and export” on page 88.)
Export tracks from songs with recordings.
File Not Found
The file cannot be found.
This appears if you try to restore a song when the FAT Partition does not have any backed up songs. (See “Song backup and restoration”
on page 86.)
I/O Too Short
The IN and OUT points are too close together.
This appears if you try to activate repeat playback mode when the IN and OUT points are too close together. Make sure the IN and OUT
points are at least 2 frames apart. (See “Using repeat playback” on page 66.)
Import File Not Found
The file you are trying to import cannot be found.
You are trying to import a WAV file from the FAT partition when there are no WAV files there. (See “Importing to tracks” on page 88.)
Connect the unit to a PC and transfer some files to the FAT partition for import.
Import File Too Large
The file you are trying to import is too large.
You are trying to import a WAV file from the MTR partition that is too large for the remaining space on the partition. Free up some space
on the (native) partion and try again.
In Bounce Mode
The unit is in BOUNCE mode.
You tried to perform an action that cannot be done while in BOUNCE mode.
In Master Mode
The unit is in MASTER REC or MASTER PLAY mode.
You tried to perform an action that cannot be done while in MASTER REC or MASTER PLAY mode.