6 – basic recording – Teac DP-006 User Manual
Page 55
TASCAM DP-006
55
6 – Basic Recording
Assigning inputs to stereo tracks (Tracks 3 and 4
only)
1. On the TRACK TYPE screen, set TRACK 3 and/or TRACK 4 to
STEREO
. (See “Setting the track type (Tracks 3 and 4 only)” on page 54.)
2. When the recorder is stopped, press the ASSIGN button to open the
INPUT ASSIGN
screen.
3. Use the F3 [5] button and F4 [b] buttons to select (highlight) the
setting value for TRACK 3 or TRACK 4.
4. Use the DATA wheel to set the input source of the TRACK 3 or TRACK
4
stereo track.
Setting values: IN A-A, IN A-B (default value), IN B-A, IN B-B
5. After making the setting, press the HOME button to return to the Home
Screen.
NOTE
Both left and right channels of stereo tracks (TRACK 3 and/or TRACK 4)
will be recorded to at the same time. Recording to just the left or just the
right channel is not possible.
TIP
You can record to track 1 and track 2 separately and then clone (copy)
them together as a stereo pair to the left and right channels of track 3 or
4. In this way, you can record their left and right channels separately. (See