Teac DP-006 - Manual (Page 21)

TASCAM DP-006
21
2 – Quick Start Guides
Setting the guitar as an input source
1. Press the INPUT SETTING button to open the INPUT SETTING
screen.
2. In order to use the guitar/line input to record guitar to TRACK 2, use the
DATA wheel to set the input source for IN A (INPUT A) to GUITAR/
LINE
, GUITAR/LINE M or GUITAR/LINE H.
3. Press the HOME button to reopen the Home Screen.
NOTE
GUITAR/LINE , GUITAR/LINE M and GUITAR/LINE H settings
change the input gain. Set according to the level of the input.
If you are not sure which setting to use, choose GUITAR/LINE. If the
input level is still too low after adjusting it, return to INPUT SETTING
screen and change the setting to GUITAR/LINE M.
If the input level is still not high enough, change the setting to GUITAR/
LINE H
.
Recording lead guitar to TRACK 2
Now, you will record lead guitar on TRACK 2 while listening to the rhythm
guitar on TRACK 3.
Follow these steps to change the recording source for TRACK 2.
1. When the recorder is stopped, press the ASSIGN button to open the
INPUT ASSIGN screen.