Teac DP-006 - Manual (Page 77)

TASCAM DP-006
77
10 – Miscellaneous Functions
Automatic power saving function
You can set the amount of time until the unit automatically turns OFF (enters
standby) after its last activity or operation.
1. When the recorder is stopped, press the MENU button to open the
MENU screen.
2. Use the DATA wheel to select (highlight) the PREFERENCE item and
press the F4 [t] button to open the PREFERENCE screen.
3. Use the F3 [5] and F4 [b] buttons to select (highlight) the Auto
Pwr Save item setting value, and use the DATA wheel to set it to one
of the following values.
Options: OFF (does not turn off automatically), 3min, 5min, 10min, 30min
(default value)
4. After completing the setting, press the HOME button to return to the
Home Screen.
Restoring preferences to default values
You can restore PREFERENCE screen settings and backup memory items
(See page 100.) to their initial values (values set when the unit was shipped
from the factory). This operation is called initialization.
1. When the recorder is stopped, press the MENU button to open the
MENU screen.
2. Use the DATA wheel to select (highlight) the PREFERENCE item and
press the F4 [t] button to open the PREFERENCE screen.
3. Use the F3 [5] and F4 [b] buttons to select (highlight) Exec next to
Initialize , and press the F2 [EXEC] button.
4. When a confirmation pop-up message appears, press the F3 [YES]
button.
After initialization completes, the PREFERENCE screen reopens.
NOTE
Press the F4 [NO] button to cancel initialization.
5. After completing initialization, press the HOME button to return to the
Home Screen.