Restoring the factory settings, Formatting the sd card, 17–system settings and formatting – Teac GT-R1 User Manual
Page 91
91
TASCAM GT-R1
17–System Settings and Formatting
Options:
OFF
(backlight always on),
5sec
(factory setting),
10sec
,
15sec
,
30sec
Adjust the display contrast
Use
CONTRAST
to adjust the display contrast.
Options: 1–20 (factory setting: 8)
Adjust the backlight brightness
Use
DIMMER
to adjust the backlight brightness.
Options:
HIGH
(factory setting),
LOW
,
OFF
(no
backlight)
Restoring the factory settings
Use the
INITIALIZE
item to restore the various
settings of this unit to their factory settings.
1 Select
INITIALIZE
and press the
¥/π
key
to highlight “
Exec
.”
2 Press the
¥/π
key again to open a
confirmation pop-up window.
3 Press the
¥/π
key to initialize the unit.
Press
STOP/HOME
to cancel initialization.
Formatting the SD card
Using
QUICK FORMAT
or
FULL FORMAT
erases all music files on the card and automatically
creates new “MUSIC” and “UTILITY” folders as
well as the “dr-1.sys” file that is necessary to use
the SD card with the GT-R1.
CAUTION
When the unit is shipped new from the factory,
its SD card also has a “MANUAL” folder that
contains a PDF copy of this Owner’s Manual file.
These are erased and not restored when the
card is formatted.