Teac GT-R1 - Manual (Page 47)

47 TASCAM GT-R1
7–Recording
Adjusting the input level
You can adjust the level of the microphone and
guitar/bass inputs. (The signal input level of the
LINE IN jack is fixed.)
The following procedures explain how to use the
Record Screen to set the levels.
1 Press the
REC/PAUSE key to begin recording
standby. The key flashes red and the Record
Screen appears.
2 Use the INPUT volume control on the right
side of the unit to adjust the microphone
input level.
NOTE
The PEAK indicator monitors the maximum •
input level. If the PEAK indicator lights, use
the INPUT volume control to lower the level.
The recording level is shown by the L/R meter.
•
If a mark remains at the right end of the bar,
use the INPUT volume control to lower the
input level, or lower the level of the effect
that you are using with the LVL control on
the Effect Screen.