Teac GT-R1 - Manual (Page 76)

76 TASCAM GT-R1
14–Using the Effects
Effect modules
After selecting an effect module icon, press the
¥/π key to open a pop-up window with multiple
parameter setting items like the one shown below.
The parameter types differ according to the module
type.
When a pop-up window is open, use the wheel and
the
¥/π key to select and set items in the pop-up.
After making a setting, press the STOP/HOME key
to close the pop-up.
Please see “20–Effect Module Parameters List” on
page 98 for the parameters of each type of module.
LEVEL knob
Use this to change the output level of the preset
effect selected in the
PRESET
item. Select the
LEVEL
knob icon and press the ¥/π key to select
the numerical value in the upper part of
the icon. The level can be set to values between
0 and 100. The
LVL
knob icon turns in response to
changes in the value.
Closing the Effect Screen
Press the STOP/HOME key (or press and hold the
FX key) to return to the Home Screen.