Teac GT-R1 - Manual (Page 7)

7 TASCAM GT-R1
About SD cards
Since this unit uses an SD card for recording and
playback, you must insert an SD card into the unit
before use. You can use 64 MB–2 GB SD cards
and 4 GB–32 GB SD HC cards with this unit.
Please see the TASCAM web site (www.tascam.
com) for information about cards that have been
tested with the GT-R1.
NOTE
When new, this unit comes with a 1GB SD card
inserted. This card can be used for recording
and playback as is. There is no need to reinsert
or format it.
Inserting the SD card
The SD card slot and the USB connector are under
the cover on the left side of the unit.
Press the cover down in the direction of the arrow
to open it. Insert the included SD card in the SD
card slot and push it until it clicks fully into place.
2–Preparation