Teac GT-R1 - Manual (Page 75)

75 TASCAM GT-R1
14–Using the Effects
Moreover, the types and number of effect modules
differ according to the selected preset. For infor-
mation about the types of effect modules in each
preset, see “19–Effects Preset List” on page 95.
Although it appears different from other setting
screens, operation is the same.
1 Use the wheel to select the desired item
and press the ¥/π key to access that
item’s settings.
2 Use the wheel to set the desired value.
3 Press the µ key when you are done making
the setting to return to item selection status.
SOURCE
Select whether the effect is applied to the input
signal (
INPUT
) or the playback signal (
PLAY
).
BANK
Effects are categorized in banks A to E. use the
following
PRESET
item to select presets inside
the selected bank. The types of presets in each
bank are as shown below.
BANK A–C: guitar presets
BANK D: bass presets
BANK E: reverb presets
PRESET
Select the preset from the current bank. See
“19–Effects Preset List” on page 95 for details
about the preset effects.