Teac GT-R1 - Manual (Page 9)

9 TASCAM GT-R1
Other cases that require formatting
• The above “
FORMAT ERROR
” screen also
appears if you install an SD card that was
formatted by a device other than the GT-R1.
Reformat the card to use it with this unit. However,
SD cards that have been formatted by TASCAM
DR-1 units are compatible with the GT-R1, so you
can use such cards as is and the above screen does
not appear.
• The following pop-up screen appears if a system
file or other crucial file was accidentally erased
from the SD card when used with a computer
In either case, press ¥/π to reformat the card.
TIP
Always make backup copies of important files as
soon as you can.
Powering the unit
The GT-R1 can be operated using a special lithium
ion battery (BP-L2) or an AC adapter (PS-P520).
One battery is included with the unit and the AC
adapter and additional batteries are available for
purchase separately. You can charge the battery by
connecting the unit to a computer by USB or using
an AC adapter. When shipped new, the included
battery is not sufficiently charged, so it must be
charged before using the unit. Charge the battery
or connect the AC adapter before using the unit.
Installing the battery
Slide the battery case cover on the back of the unit
to open it, and insert the GT-R1 battery that was
included in the box.
2–Preparation