Teac GT-R1 - Manual (Page 78)

78 TASCAM GT-R1
15–Using the Tuner
is shown and the center of the meter is
highlighted. A bar appears to the left if the
tuning is too low and a bar appears to the
right if it is too high. The longer the bar is
the more out of tune the instrument is.
GUITAR (guitar tuner mode)
Change the setting for each string to be tuned.
1 Use the
NOTE
item to select the string that
you want to tune (1E, 2B, 3G, 4D, 5A, 6E).
2 The string is in tune when the center of the
meter is lit.
The tuning procedure is the same as in the
AUTO mode.
BASS (bass tuner mode)
Change the setting for each string to be tuned.
1 Use the
NOTE
item to select the string that
you want to tune (1G, 2D, 3A, 4E, 5B).
2 The string is in tune when the center of the
meter is lit.
The tuning procedure is the same as in the
AUTO mode.
OSC. (oscillator mode)
The built-in oscillator can output a sine wave of a
pitch in the three octaves between C3 and B5
through the /
LINE OUT jacks. In addition to the
CALIB
item described above, the oscillator mode
has the following three setting items.
NOTE
Set the pitch of the tuning tone (C3–B5).