Teac GT-R1 - Manual (Page 43)

43 TASCAM GT-R1
7–Recording
CAUTION
Use headphones to monitor when you are
recording with a microphone. If you use
speakers to monitor, the sound output from
the speakers may also be recorded, causing a
poor recording and even feedback.
NOTE
The input source is the recording source when
recording.
TIP
Use the GT-R1’s built-in effects as necessary •
on the input source.
The EFFECT SOURCE, EFFECT ON/OFF and
•
MONITOR ON/OFF settings are saved
separately for each input source. (See
“14–Using the Effects” on page 74.)
Setting the INT/MIC IN input
functions
After selecting
INT/MIC
as the
INPUT
item,
press the µ key to highlight
INPUT
, then turn
the wheel right to open the
INT/MIC
Input
Setting Screen.
This screen has the following settings. Except for
POWER
, all items also affect the built-in micro-
phone. Among these, the
POWER
item only affects
the MIC IN input. The other items affect both the
built-in mic and the MIC IN input.