7–recording, Selecting the file type and sampling frequency – Teac GT-R1 User Manual

Page 40

TASCAM GT-R1

In addition to using the built-in microphone, you
can record using an external microphone or record
the output signal from a mixer or other audio
source. You can select among MP3 (44.1/48 kHz,
32–320 kbps) and WAV (44.1/48 kHz, 16/24-bit)
audio recording formats. Moreover, with this unit,
you can mix and record a sound input through the
built-in mic or one of the input jacks with an audio
file that is played back using the overdubbing
function.

Selecting the file type and

sampling frequency

Select the audio file type that you want to record
before you start recording.
1 Press the

key to open the Menu

Screen.

2 Select the

REC SETTING

item to open the

Recording Settings Screen.

3 Use the

FORMAT

item to select the file type

from the following options: WAV at 16-bit
(factory setting) or 24-bit, or MP3 at 32
kbps, 64 kbps, 96 kbps, 128 kbps, 192 kbps,
256 kbps, or 320 kbps.

4 Use the

SAMPLE

item to select a sampling

frequency of 44.1 kHz (factory setting) or
48 kHz.

NOTE

For overdubbing, set the file type to WAV.

•

You cannot use overdubbing when the
setting is MP3. (See “Overdubbing” on
page 50.)

7–Recording