Teac DR-40 - Manual (Page 62)

62
TASCAM DR-40
If you record again using the same playback file (File-A), the
file name of the new recording will be as follows.
File-F:
TASCAM_0006S12.WAV
In this mode, each time you record with the same playback
file, the number in item 2 increases by one for the name of
each new file.
1
: Set with the
WORD
item on the
FILE NAME
screen
2 : Recording file base number
3 : “S” is the source file and “V” is the virtual file
4 : Assigned channels (“12” is channels 1/2 and “34” is
channels 3/4)
6
: Backup number in the virtual file
NOTE
In OVERDUB SEPARATE mode, the base number of the •
recording file and “S12” are added to the file name of the
playback file.
If writing files copied from elsewhere is not possible, enable
•
writing using a computer, for example.
Recording automatically (AUTO REC)
This function allows the unit to respond to input sound levels
and start and pause recording, as well as set marks and create
new files, for example.
1 Press MENU to open the
MENU
Screen.
2 Use the + or – button to select
REC SETTING
, and press
the ENTER/MARK or / button.
REC SETTING
screen appears.
3 Use the + or – button to select the
MODE
and press the
ENTER/MARK button or / button.
4 Use the + or – button to set the
MODE
of the
AUTO REC
setting.
OFF
(Default): Off
REC
: Records and pauses automatically
MARK
: Sets marks automatically during recording
4 – Recording