Teac DR-40 - Manual (Page 102)

102
TASCAM DR-40
2 Use the + or − button to select
OTHERS
, and press the
ENTER/MARK or / button to open the
OTHERS
submenu.
3 Use the + or – button to select
SYSTEM
, and press the
ENTER/MARK or / button.
SYSTEM
screen appears.
The following settings can be made for the items on the
SYSTEM
screen.
Use the . or / button and the + or − button to set each
item.
Turning the unit power OFF automatically
Use the
AUTO OFF
item to set the time before the unit power
automatically turns OFF after the last activity or use when
powered by the battery.
Options:
OFF
(factory setting—the unit does not automatically
turn OFF),
3 min
,
5 min
,
10 min
,
30 min
Setting the backlight
Use
BACKLIGHT
to set the time until the backlight
automatically turns OFF after the last operation when
powered by the internal battery.
Options:
OFF
(turned off),
5 sec
(factory setting),
10 sec
,
15
sec
,
30 sec
,
ALWAYS
(always on)
Adjusting the display contrast
Use
CONTRAST
to adjust the display contrast.
Options:
1
–
20
(factory setting:
5
)
Setting the type of AA batteries
Use
BATTERY TYPE
to set the type of the AA batteries that
you are using. This setting is used to show the amount of
remaining battery charge and determine if the unit has
enough power for normal operation.
Values:
ALKAL
(alkaline batteries, default),
Ni-MH
(nickel-metal
hydride batteries)
Setting the phantom power voltage
Use the
PHANTOM VOLT
item to set the voltage of the
phantom power supplied when external mics that require it
are connected.
Options:
+24V
,
+48V
(factory setting)
12 – Settings and Information