Teac DR-40 - Manual (Page 17)

TASCAM DR-40
17
Precautions for placement and use
The operating temperature should be between 0°C and •
40°C (32°F and 104°F).
Do not install in the following types of places. Doing so
•
could degrade the sound quality and/or cause malfunctions.
Places with significant vibrations or that are otherwise •
unstable
Near windows or other places exposed to direct sunlight
•
Near heaters or other extremely hot places •
Extremely cold places •
Places with bad ventilation or high humidity •
Very dusty locations •
Places that could be directly exposed to rain or other •
water
Avoid installing this unit on top of any heat-generating •
electrical device such as a power amplifier.
Beware of condensation
If the unit is moved from a cold to a warm place, or used
after a sudden temperature change, there is a danger of
condensation; vapor in the air could condense on the internal
mechanism, making correct operation impossible. To prevent
this, or if this occurs, let the unit sit for one or two hours at the
new room temperature before using.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not clean the
unit with a chemically treated cloth or substances such as
benzene, thinner and alcohol because they might cause
damage to the surface of the unit.
User registration
See the end of this manual for details about user registration.
1 – Introduction