Teac DR-40 - Manual (Page 37)

TASCAM DR-40
37
Shutting down
Press and hold the (HOME) [8] button until
LINEAR
PCM RECORDER
appears on the display.
The power turns off after the unit completes its shutdown
process.
CAUTION
Always use the (HOME) [8] button to shutdown the
unit.
Do not remove the batteries or disconnect the power cable
(AC adaptor TASCAM PS-P515U or USB cable) accidently while
the unit is operating. If you do so, the unit cannot shut down
properly and all recordings, settings and other data will be
lost. Lost data cannot be restored.
Resume function
The unit has resume function. When started up, the unit is
located to the position (time) where it left off when shut down
previously.
If the Playback button is pressed after start-up, the file the unit
was playing when shut down previously starts to be played
from the position (time) where the unit left off when shut
down.
NOTE
The required data are stored in the SD card. The resume
function does not work if the card is exchanged or formatted.
Setting the date and time
Using its internal clock, this unit remembers the date and time
when a file is recorded.
1 Press the MENU button to open the
MENU
screen.
2 Use the + or – button to select the
OTHERS
menu item
(highlighted), and press the ENTER/MARK or /
button.
The
OTHERS
screen is displayed.
3 – Preparation