Teac DR-40 - Manual (Page 26)

26
TASCAM DR-40
2 – Names and Functions of Parts
4 Elapsed time
This shows the elapsed time (hours: minutes: seconds) of
the current file.
5 Speaker output status
Icon shown: Speaker output ON
Icon not shown: Speaker output OFF
6 Power supply status
When a battery is being used, a battery icon shows the
amount of power remaining in bars ( , , ). The battery
is almost dead and the power will soon turn off if the icon
has no bars . When using the PS-P515U AC adaptor (sold
separately) or USB bus power,
appears.
NOTE
Sometimes a
Battery Low
warning appears when recording
or conducting other demanding operations even when
battery power remains.
7
Recorder operation status
8 Stopped
9 Paused
7 Playing back
, Fast-forwarding
m Fast-rewinding
/ Skipping forward
. Skipping backward
8 Level meter
The level of the input or playback sounds is shown.
During OVER DUB (MIX), this shows the mixed level of the
input and playback signals.
9 Track status display
The display changes according to the recording mode.
: Playing a file recorded in MONO or STEREO
mode
or : Playing a file recorded in dual recording mode
:
Playing a file recorded in 4-channel recording
mode
or : In OVERDUB SEPARATE mode
or : In OVERDUB MIX mode
NOTE
When a track is soloed, its name appears highlighted .
0 Loop playback IN (starting) and OUT (ending) points
The set starting and ending points of the loop are shown.
The icon appears at the playback position when the
starting point is set.
The icon appears at the playback position when the
ending point is set.