Teac DR-40 - Manual (Page 106)

106
TASCAM DR-40
13 – Using the REMOTE jack
This unit has a REMOTE jack to which you can connect a
TASCAM RC-3F footswitch-type remote control or TASCAM
RC-10 wired remote control (both sold separately) that can be
used to operate the unit.
Footswitch (TASCAM RC-3F)
Footswitch
TASCAM RC-3F
(sold separately)
Setting footswitch operation
Use the
REMOTE
setting screen to make footswitch settings.
1 Press the MENU button to open the
MENU
screen.
2 Use the + or − button to select
OTHERS
, and press the
ENTER/MARK or / button to open the
OTHERS
submenu.
3 Use the + or − button to select (highlight)
REMOTE
menu
item, and press the ENTER/MARK or / button to
open the
REMOTE
screen.
4 Use the + or − button to select (highlight)
CONTROLLER
menu item, and press the ENTER/MARK or / button.
5 Use the + or – button to change the
CONTROLLER
item to
RC-3F
. (Default:
RC-3F
).
6 Use the . and + or − button to select (highlight)
MODE
item, and press the ENTER/MARK or / button.
7 Use the + or – button to change the
MODE
item.
Options:
PLAY
(default),
RECORD1
,
RECORD2
,
MINUTES
8 Press the (HOME) [8] button to return to the Home
Screen.