Teac DR-40 - Manual (Page 11)

TASCAM DR-40
11
3 Press the RECORD [0] button to switch to recording
standby. The indicator will flash.
RECORD button/indicator
NOTE
If the or icon appears in the upper right of the Home
Screen, the adjustment for the angle and the left-right
channels of the microphone do not suit the recording setting.
Change the settings. (See “Using the built-in microphone” on
page 41.)
4 Use the INPUT LEVEL + or – button on the left side
panel to adjust the input level. See “Adjusting the input
level” on page 49 for details.
5 Press the RECORD [0] button to start recording. The
indicator will light during recording.
6 Press the (HOME) [8] button to finish recording.
NOTE
To pause recording, press the RECORD [ 0 ] button. Press the
RECORD [ 0 ] button again to restart recording in the same
file.
7 Press the PLAY [7] button for playback. If you use a
headphone or amplifier/speaker set, connect it to the
/LINE OUT socket on the left side panel.
For playback over the built-in speaker, enable it on
the speaker settings screen (See “Using the built-in
speaker” on page 40.)
Powered monitor speakers or
amplifer and speakers
Headphones
8 Use the + or – button to control the playback volume.
9 Press the
(HOME) [8] button to stop playback.
NOTE
If you have made several recordings, use the . or /
button to select the file to play when playing back or stopped
and the Home Screen is displayed.
Quick Start Guide