Dimension One Spas 01510-1030E Rev A - Manual (Page 32)

Export Sonic Immersion System Dealer Installation Guide
Installing Power Supply in Equipment
Compartment
1. Turn the power supply so that you can see the Voltage
Selector Switch, see Figure 28, and place the switch in the
correct position (115V for UL and CSA spas or 240V for CE
spas) for your location.
1.Voltage Switch
Figure 28. Voltage Switch on Back of Power Supply
2. Locate two #8 x ½” (1.27 cm) Pan head screws (P/N 01011-
38) in the power supply kit. The power supply has two holes
for attaching it to the wall of the equipment compartment,
Figure 29. Locate the hole in the upper right corner of the
power supply. Use electric screwdriver to secure the power
supply. Now use the remaining screw to secure the left
bottom corner of the power supply.
28