Sundance SMT950 - Manual (Page 39)

Version 2.0 Page 39 of 52 SMT950 User Manual
0 0 Polarity DAC Trigger signal selected – Non-Inverting.
1 1 Polarity DAC Trigger signal selected – Inverting.
Miscellaneous Register – 0x1C
Setting Bit 11 Description
0 0 Internal DAC Trigger set to ‘0’.
1 1 Internal DAC Trigger set to ‘1’.
Miscellaneous Register – 0x1C
Setting Bit 9/8 Description
0 00 ADC Channel A and B ; 1 sample of each ADC channel packed onto one 32-bit word. [ChB ChA]
1 01 ADC Channel A only ; 2 samples packed onto one 32-bit word [word(t+1) word(t)]
2 10 ADC Channel B only ; 2 samples packed onto one 32-bit word [word(t+1) word(t)]
3 11 ADC Channel A and B ; 1 sample of each ADC channel packed onto one 32-bit word. [ChB ChA]
Miscellaneous Register – 0x1C
Setting Bit 5 Description
0 0 Internal ADC Trigger (from register 0x1C – bit 3) selected.
1 1 External ADC Trigger (from connector J24) selected.
Miscellaneous Register – 0x1C
Setting Bit 4 Description
0 0 Polarity ADC Trigger signal selected – Non-Inverting.
1 1 Polarity ADC Trigger signal selected – Inverting.
Miscellaneous Register – 0x1C
Setting Bit 3 Description
0 0 Internal ADC Trigger set to ‘0’.
1 1 Internal ADC Trigger set to ‘1’.
Miscellaneous Register – 0x1C
Setting Bit 2 Description
0 0 Binary Format.
1 1 2’s Complement.
Miscellaneous Register – 0x1C
Setting Bit 1 Description
0 0 VCXO selection.
1 1 External Source Selected.
Miscellaneous Register – 0x1C
Setting Bit 0 Description
0 0 On-Board 10-MHz Reference Clock selected.
1 1 External Reference Selected.