Sundance SMT950 - Manual (Page 21)

Version 2.0 Page 21 of 52 SMT950 User Manual
Sundance defines these two connectors as the Sundance LVDS Bus (SLB). It has
originally been made for data transfers using LVDS format but can also be used with
single-ended lines, which is the case for the SMT950. To know more about the SLB,
please refer to
the SLB specifications .
The figure underneath illustrates this configuration. The bottom view of the daughter
card is shown on the right. This view must the mirrored to understand how it connects
to the main module.
Figure 11 – Mezzanine module Connector Interface (SLB data and power connectors).
The female differential connector is located on the base module. The Samtec Part
Number for this connector is QTH-060-01-F-D-DP-A.
The female power connector is located on the base module. The Samtec Part
Number for this connector is BKS-133-03-F-V-A
The male differential connector is located on the mezzanine card. The Samtec Part
Number for this connector is QSH-060-01-F-D-DP-A
Bank A
Power
connectors
Data
connectors
Bank B Bank C