Sundance SMT942 - Manual (Page 37)

User Manual SMT942 Page 37 of 55 Last Edited: 23/08/2011 17:25:00
0 DACA Output current scale.
DAC Chab Register E 0x3E.
DAC Chab Register E 0x3E
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
1 Pll_lpf_r
eset
Vco_div2 Pll_gain Pll_range
Default ‘0’ ‘0’ ‘00’ ‘0000’
0 Pll_m Pll_n
Default ‘00000’ ‘000’
DAC Chab Register E 0x3E
Setting Bit 2:0 Description - pll_n
0 ‘000’ n value=1.
1 ‘001’ n value=2.
2 ‘011’ n value=4.
3 ‘111’ n value=8.
Setting Bit 7:3 Description - pll_m
0 ‘00000’ m value=1.
1 ‘00001’ m value=2.
2 ‘00011’ m value=4.
3 ‘00111’ m value=8.
4 ‘01111’ m value=16.
5 ‘11111’ m value=32.
Setting Bit 11:8 Description - pll_range to adjust the vco current
0 ‘0000’ Minimum bias current and lowest VCO frequency range.
1 ’1111’ Maximum bias current and highest VCO frequency range.
Setting Bit 13:12 Description pll_gain to adjust the vco gain (Kvco)
0 ‘00’
1 ‘01’
2 ‘10’
3 ‘11’
Setting Bit 14 Description vco_div2
0 ‘0’ PLL clock output is not divided.
1 ’1’ PLL clock output is divided by 2.
Setting Bit 15 Description pll_lpf_reset
0 ‘0’
1 ’1’ Holds the pll loop filter at 0 volts