Sundance SMT942 - Manual (Page 31)

User Manual SMT942 Page 31 of 55 Last Edited: 23/08/2011 17:25:00
1 1 Adds 6dbs to the mixer gain output.
Setting Bit 2 Description clkdiv shift
0 0
1 1 A rising edge on the selected sync for the clock dividers will cause a slip in the
synchronous counter by one period (used for multi DAC time alignement.
Setting Bit 4 Description clkdiv sync sel
0 0 SYNC selected as input to sync clock dividers
1 1 TXENABLE selected as input to sync clock dividers
Setting Bit 5 Description clkdiv sync ena
0 0
1 1 Enables syncing of the clock divider using the sync or TXENABLE pins
Setting Bit 6 Description sif sync sig
0 0 Clears sync
1 1 Causes a sync
Setting Bit 7 Description sif4
0 0 3-bit serial interface
1 1 4-bit serial interface
Setting Bit 15:8 Description Phase Offset[7:0]
0 0
DAC Chab Register 3 0x33.
DAC Chab Register 3 0x33
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
1 Phase add [7:0]
Default ‘00000000
0 Phase Offset [15:8]
Default ‘00000000
DAC Chab Register 3 0x33
Setting Bit 7:0 Description Phase Offset[15:8]
0 0
Setting Bit 15:8 Description Phase add[7:0]
0 0
DAC Chab Register 4 0x34.
DAC Chab Register 4 0x34
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
1 Phase add [23:16]
Default ‘00000000