Sundance SMT350 - Manual (Page 35)

Version 1.9 Page 35 of 45 SMT350 User Manual
Mezzanine Module Converters Temperature (not implemented) – 0x1B
Mezzanine Module Converters Temperature – 0x1B
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Temperature in Celcius Degrees
Default ‘00000000’
Miscellaneous Register – 0x1C.
Miscellaneous Register – 0x1C
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Reserved ADC Trigger
- Selection
ADC Trigger
- Polarity
ADC Trigger
- Internal
ADCs
Data
Clock
Selection
Reference
Selection
Default ‘00’ ‘0’ ‘0’ ‘0’ ‘0’ ‘0’ ‘0’
1 Reserved DAC Trigger
- Selection
DAC Trigger
- Polarity
DAC Trigger
- Internal
Reserved SHB Selection
Default ‘00’ ‘0’ ‘0’ ‘0’ ‘0’ ‘00’
Miscellaneous Register – 0x1C
Setting Bit 13 Description
0 0 Internal DAC Trigger (from register 0x1C – bit 11) selected.
1 1 External DAC Trigger (from connector J24) selected.
Miscellaneous Register – 0x1C
Setting Bit 12 Description
0 0 Polarity DAC Trigger signal selected – Non-Inverting.
1 1 Polarity DAC Trigger signal selected – Inverting.
Miscellaneous Register – 0x1C
Setting Bit 11 Description
0 0 Internal DAC Trigger set to ‘0’.
1 1 Internal DAC Trigger set to ‘1’.
Miscellaneous Register – 0x1C
Setting Bit 9/8 Description
0 00 ADC Channel A and B ; 1 sample of each ADC channel packed onto one 32-bit word. [ChB ChA]
1 01 ADC Channel A only ; 2 samples packed onto one 32-bit word [word(t+1) word(t)]
2 10 ADC Channel B only ; 2 samples packed onto one 32-bit word [word(t+1) word(t)]
3 11 ADC Channel A and B ; 1 sample of each ADC channel packed onto one 32-bit word. [ChB ChA]
Miscellaneous Register – 0x1C
Setting Bit 5 Description
0 0 Internal ADC Trigger (from register 0x1C – bit 3) selected.
1 1 External ADC Trigger (from connector J24) selected.
Miscellaneous Register – 0x1C
Setting Bit 4 Description
0 0 Polarity ADC Trigger signal selected – Non-Inverting.
1 1 Polarity ADC Trigger signal selected – Inverting.
Miscellaneous Register – 0x1C