Sundance SMT350 User Manual
Page 18
Version 1.9
Page 18 of 45
SMT350 User Manual
The figure underneath illustrates this configuration. The bottom view of the daughter
card is shown on the right. This view must the mirrored to understand how it connects
to the main module.
Figure 9 – Mezzanine module Connector Interface (SLB data and power connectors).
The female differential connector is located on the base module. The Samtec Part
Number for this connector is QTH-060-01-F-D-DP-A.
The female power connector is located on the base module. The Samtec Part
Number for this connector is BKS-133-03-F-V-A
The male differential connector is located on the mezzanine card. The Samtec Part
Number for this connector is QSH-060-01-F-D-DP-A
The male power connector is located on the mezzanine card. The Samtec Part
Number for this connector is BKT-133-03-F-V-A
The mated height between the main module and the daughter card is 5 mm.
Bank A
Power
connectors
Data
connectors
Bank B
Bank C