Sundance SMT350 - Manual (Page 19)

Version 1.9 Page 19 of 45 SMT350 User Manual
Some JTAG Lines are also mapped onto this connector to be used in case the
Daughter module would have a TI Processor. They would allow debugging and
programming via JTAG.
The following table shows the pin assignment on the power connector:
2 1
33
Pin Number Pin Name Description of Signal
1 D+3V3 Digital 3.3 Volts
2 DGND Digital Ground
3 D+3V3 Digital 3.3 Volts
4 DGND Digital Ground
5 D+3V3 Digital 3.3 Volts
6 DGND Digital Ground
7 D+3V3 Digital 3.3 Volts
8 DGND Digital Ground
9 D+5V0 Digital 5.0 Volts
10 DGND Digital Ground
11 D+5V0 Digital 5.0 Volts
12 DGND Digital Ground
13 D+5V0 Digital 5.0 Volts
14 DGND Digital Ground
15 D+5V0 Digital 5.0 Volts
16 DGND Digital Ground
17 D+12V0 Digital +12.0 Volts – not used on the SMT350
18 DGND Digital Ground
19 D+12V0 Digital +12.0 Volts – not used on the SMT350
20 DGND Digital Ground