Sierra Video View Multi-Viewer MV-XX - Manual (Page 71)

SIERRA VIEW
65
Audio Properties Tab (Video or Audio object)
This tab only exists within the Properties tab of Video and Audio type tiles.
Width - sets the width of the audio meter bars.
Scale - sets the scale type of all the audio meter bars on display in this tile.
Scale Label Position - sets the positioning of the scale labelling on either side of the
meter.
Bar Colors - selects bar to which the color of the over, upper and lower range applies.
Over Color - sets the over range color for the bar selected in the Bar Colors control.
Upper Color - sets the upper range color for the bar selected in the Bar Colors control.
Lower Color - sets the lower range color for the bar selected in the Bar Colors control.
Labels - sets the display of the bar labels to either an enumerated format, or the labels
as entered for the respective channels, or off.
Color - sets the color of the bar labels.
Alarm Indicators - enables the alarm indicators at the top of the bars.
Transparent on Video - enables the transparency of the meter bars when they are on
the in-picture area.
Transparency Level - sets the transparency of the audio bars when they are on the in-
picture area.
Display outside of picture - extends the width of the tile and displays the meters to the
left and right of picture area.
Visible - enables / disables the audio bars.
Split Bars - equally divides the audio bars either side of the picture.