Sierra Video View Multi-Viewer MV-XX - Manual (Page 34)

SIERRA VIDEO
28
Remote Panel
The optional 1U remote control unit (SV-Remote ) may be installed in 19 inch bays and
has a depth of approximately 140mm, including connectors. It does not use forced
cooling.
Preset configurations already stored in the Sierra View can be recalled by briefly pressing
the desired pre-set button (1–10 on the right side of the panel), which will illuminate. A
current multi-viewer configuration may be stored as one of ten user presets by
depressing the chosen button number for at least three seconds.
An SV-Remote control panel may be set either to address single or multiple systems.
When addressing multiple systems (‘collective mode’), only the preset storage and recall
buttons are operative and all systems will respond in parallel, e.g., store or recall preset
1-10. Other control keys and the keyboard socket cannot be used in collective mode.
Note:
Should the frame lose power, it will restore the last known configuration settings on
reboot and automatically reflect these in the browser.