Sierra Video View Multi-Viewer MV-XX - Manual (Page 28)

SIERRA VIDEO
22
Video Outputs
The two DVI-I display outputs (per multi-viewer) support resolutions up to HD 1080p60,
16:9 (1920 x 1080). Both digital and analog outputs are available on these connectors.
Tiles displayed via the outputs can be varied continuously in size and position, cropped
or displayed in pre-configured screen layouts on a chosen colored background. The pair
of outputs may either be set to provide two identical display configurations, or they may
have differing arrangements.
Audio I/O
Audio levels may be displayed using up to 16 bargraphs in each tile, either superimposed
on each video image or outside active video. Audio is derived from the incoming
embedded audio (when using SDI or HDSDI inputs), or from external sources, for which
the appropriate audio input card option must be installed.
Additionally, external audio sources may be monitored using level data from the Sierra
Video AM-xx via the LAN, or by connecting the AM-xx DVI-I display output to one of the
video inputs for a multi-channel bargraph display with up to 64 channels (32 pairs).
Optional audio output cards (32 channels analog or 16 AES/EBU pairs) may be fitted to
provide demuxed outputs from embedded audio.
Audio input and output cards must be fitted in conjunction with the appropriate rear
connector modules.
There is an 8 channel analog audio monitor output, which may be assigned from any
input channel of any format, excluding incoming external audio level data.
Note:
The number of audio channels described always refers to individual channels, not
channel pairs. For example, eight monitor outputs relate to eight individual analog
channels or 4 pairs AES/EBU channels.
All bargraph scales and ballistics conform to international standards and include BBC
PPM, DIN PPM, Nordic PPM, VU, extended VU, and AES/EBU digital.