Sierra Video View Multi-Viewer MV-XX User Manual
Page 58
SIERRA VIDEO
52
AM-xx Tab
The Sierra Video AM-xx is a separate 1U based hardware device for converting multi-
channel audio into level data that can be distributed via a LAN. The AM-xx can be used in
conjunction with the Sierra View as a means of providing additional external audio
interfacing (up to 64 audio channels per frame).
This tab enables the setup of one or more AM-xx units for use in audio server mode. A
maximum of 20 AM-xx units can be assigned to a multi-viewer. However, network
bandwidth requirements must also be carefully considered. Each AM-xx frame requires
285kbps for audio metering data.
Name - displays the given name of the AM-xx audio server. A default name (e.g. ‘audio-
server-0’) will be generated when pressing the ‘New’ button to add a frame. This name
can be edited.
IP Address - for entering the IP address of the AM-xx.
New - to add a new AM-xx.
Apply - applies changes to the AM-xx name or IP address.
Delete - deletes the selected AM-xx from the list.