Sierra Video View Multi-Viewer MV-XX - Manual (Page 44)

SIERRA VIDEO
38
Main menus
Module Menu
The Module Menu allows a module's global settings to be configured.
Auto update – automatically update tile layout to the display output and preview every
time it is changed in the edit workspace.
Update layout - transfer edit workspace layout to display output and preview.
Get layout - transfer the current display layout to the edit workspace.
Setup module - opens the Module Properties dialogue of the currently selected tile
object.
Setup source - opens the Source Properties dialogue of the currently selected tile
object.
Setup remotes - opens the Remote Control Setup dialogue for SV-REMOTE operation.
Set Time - opens the Time dialogue to adjust the clock and date settings.
Halt, Reboot, Reset Module – maintenance items for shutting down, rebooting the
system, or resetting input/output cards.
Halting the module guarantees that any files that have not been saved yet, such as layout
ones, will get saved before powering off the frame. This stops the system from running.
The only way to restart it is to power off – power on again.
Rebooting the module will shut the system down and start it back up again. This can take
up to 70 seconds.
Resetting the module leaves the CPU running, but resets and reloads the firmware into
all the input/output cards.
Note:
The error message, ‘Selected object has no source’, will appear if the current object is not
an audio or video object.