Sierra Video View Multi-Viewer MV-XX - Manual (Page 64)

SIERRA VIDEO
58
If Use Audio Channel Alarm Settings is not ticked and audio loss alarm is enabled in the
Alarm
tab of the Source Properties dialogue, then all the channels will have their audio
loss alarms enabled with a nominal threshold set for the audio loss level.
If Use Audio Channel Alarm Settings is ticked and audio loss alarm is enabled in the
Alarm tab
of the Source Properties dialogue, then the enabled state of each channel will
depend on the settings in this Audio Alarms dialogue and the threshold set for the audio
loss level will also be determined here.
If Use Audio Channel Alarm Settings is ticked but the audio loss alarm is disabled, then
none of the audio loss alarms will be enabled.
The following table summarises the various alarm status conditions.
Individual
alarm Use Audio
Channel Alarm
Settings Alarm state
Enabled Enabled Enabled and uses user threshold settings
Enabled Disabled Enabled but uses nominal threshold
settings
Disabled Enabled Disabled
Disabled Disabled Disabled