Sierra Video View Multi-Viewer MV-XX - Manual (Page 70)

SIERRA VIDEO
64
Properties Tab
This tab will not appear if the object type is set to ‘None’ in the Type tab.
For each of the other object type selections, a specific set of controls will appear on the
Properties tab.
Source Properties Tab (Video or Audio object)
This tab only exists within the Properties tab of Video and Audio type tiles.
Source - for a video tile, this selects the source of the video to display in the tile. For an
audio tile, it selects the audio channels that have been set up to be associated with the
chosen source.
Display on all screens – this will display the video tile on both outputs. The tiles remain
locked to each other on both outputs (moving the tile on one screen will also move it to
the same position on the other screen).