Cb a – REMKO MHP-Manager Wireless Remote Control User Manual
Page 7

Controls in operating mode
C
B
A
If a parameter, a function/
display or a parameter menu
is not supported by the
connected heating circuit
controller, it is hidden or this
is indicated on screen with
dashes.
NOTE
Display in operating mode
Display
Cancel
Main menu
01
User
Time programmes
The wireless remote control used to regulate the heat pump manager
is controlled in operating mode with the following keys.
Display during value entry
Cancel
Target room temp. 1
20.0 °C
OK
Default
Favourite
Basic operating procedure
Cancel
Default
Favourite
OK
Cancel the current
function without saving
Carry over setting to
Favourites menu
Change setting value to
factory setting
Cancel the current
function and save
Next setting (e.g. time:
Hour->Minute)
Pressing the Home
key (B) takes you from
operating the controller
to normal operation
(standard display)
Using the rotary knob
(A), you can move
through the menus,
move through settings/
parameters, or adjust
the selected value.
Each of the four function
keys (C) stands for one
of the four rows on the
display. Pressing an
F-key selects the adjacent
menu, value or function.
Home
Pressing the Home key
takes you to operating
mode.
Move through the menu
items (types of setting)
with the rotary knob,
e.g. Display, User, etc.
Use the corresponding
F-key to select the item
you chose above.
With the rotary knob,
choose a sub-menu (Ap-
pliance / Consumer),
e.g. System (heating
appliance), Hot water,
Heating circuit.
Home
Use the corresponding
F-key to select the sub-
menu you chose above,
e.g. Hot water.
Choose the setting/dis-
play value with the rotary
knob. The current value
is displayed.
Use the corresponding F-
key to select the setting/
display value you chose
above.
Use the rotary knob to
change the setting.
Select the function with
the corresponding F-key.
Confirm the change
or cancel by pressing
“Cancel”, “Favourite”,
“Default” or “OK”
The function keys perform the
following roles:
Previous setting (e.g.
date: Month<-Year)
7