REMKO MHP-Manager Wireless Remote Control - Manual (Page 4)

Safety notes
Warranty
The precondition for all warranty
claims is that the orderer or his
customer has fully filled out the
"warranty registration card"
supplied with the unit, at the
time when it was purchased and
commissioned, and returned it to
REMKO GmbH & Co. KG.
The warranty conditions are
listed in the "General terms and
conditions". Furthermore, only the
parties to a contract can conclude
special agreements beyond these
conditions. For this reason, please
contact your contractual partner
first.
Disposing of packaging
All products are packed for
transport in environmentally
friendly materials. You can make
a valuable contribution to reducing
waste and sustaining raw materials
by only disposing of packaging at
approved collection points.
Disposing of the units
and their components
Only recyclable materials are used
in the manufacture of the units
and components.
Help protect the environment
by ensuring that the units
or components (for example
batteries) are not disposed of in
household waste, but only in
accordance with local regulations
and in an environmentally safe
manner, e.g. using authorised
disposal and recycling specialists or
council collection points.
Environmental
protection
and recycling
The units are shipped in sturdy
transport packaging. Immediately
check the units on delivery and
make a note of any damage or
missing parts on the delivery note.
Inform the forwarding agent and
contractual partner. Warranty
claims at a later date will not be
accepted.
Transport and
packaging
Carefully read the operating
instructions before commissioning
the unit for service. It provides
useful tips and information as
well as hazard warnings to prevent
injury or material damage .
Failure to follow the directions
in this manual can endanger
persons, the environment and
the equipment itself and will void
any claims for liability.
■ Keep this manual close to
the equipment.
■ Modification of the units
and components supplied
by REMKO is not permitted and
can cause malfunctions.
■ Operating equipment
or components with obvious
defects or damage is not
permitted.
■ Do not operate units or
components if there are obvious
defects or signs of damage.
■ Repairs may only be carried out
by authorised personnel, while
cleaning may be carried out by
the operating company.
■ The units or components
are not to be exposed to
any mechanical stresses,
extreme levels of humidity
or direct sunlight.
The purpose of the units is
the entry and display of system
parameters for the Multitalent heat
pump manager.
Any different or additional
use is a non-intended use.
The manufacturer/supplier assumes
no liability for damages arising from
a non-intended use. The user bears
the sole risk in such cases.
Intended use also includes working
in accordance with the operating
and installation instructions and
complying with the maintenance
requirements.
Intended use
REMKO WIRELESS REMOTE CONTROL
FOR MULTITALENT HEAT PUMP MANAGER
4