REMKO GPM 15 - Manual (Page 21)

21
Hinged wall bracket
Instructions for fitting the hinged
brackets are supplied in the
packaging.
The use of hinged brackets is
recommended in the following
cases:
a) Installation of the unit in a
corner
b) Installation of the unit at a right
angle to the wall to which it is
fastened
c) Installation of the unit on a pillar
Standard wall bracket
Align the wall bracket against a
suitable point on the wall (spirit
level) and fasten securely.
Mark the holes to be drilled with a
pencil.
- Securely fasten the wall brackets
using suitable dowels and bolts
size M10 or larger.
- Fit both pairs of brackets as
shown in the diagram using the
supplied material.
- When fitting the brackets, lock
the nuts by using a lock ring
between the brackets and nuts.
- Position the unit on the brackets
so that the holes in the unit
coincide with those in the
brackets, whereby the tips of the
brackets must be flush with the
front of the unit (except for GPM
75).
- Fasten the units with the M8
bolts provided, whereby a lock
ring must be inserted between
the bolt and bracket.
EDP No: 228760
Wall bracket (standard type) GPM
15 - 75
The units must only be
mounted on walls, ceilings
or constructions of flame
retardant materials designed
to take the weight.
ATTENTION
We reserve the right to make changes to dimensions and design in the interest of technological advances.
The brackets must be screwed
stress-free to the unit and wall.
NOTE
Ensure that the type of dowels
and size of the bolts are
suitable for the type of wall
and can support the weight of
the unit.
NOTE
s s s