Q-See QC40198 - Manual (Page 51)

NAVIGATION AND CONTROLS
QC40198 User Manual
42 | P a g e
4.8.2.1 Intelligent Positioning Key
In the middle of the eight direction arrows, there is a 3D intelligent positioning key (see figure 4-38). This function
only works if your protocol supports it, and you need to use mouse to control.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen to adjust section size.
The dragged zone supports 4X to 16X speeds. The function will work automatically. The smaller the zone you
dragged, the higher the speed.
Figure 4-38
Here is a chart for your reference:
Name Function
key function Shortcut
key Function
key function Shortcut
Key
Zoom Near Far

Focus Near │  Far ► │
Iris close  
Open

4.9 Preset/ Patrol/Pattern/Scan
Click the “set” button illustrated in Figure 4-36. This will generate the interface shown in Figure 4-39.
Here you can set the following items:
 Preset
 Tour
 Pattern
 Border
Figure 4-39
Click the page switch button illustrated in Figure 4-36. This will activate the following functions:
 Preset
 Tour
 Pattern
 Auto scan
 Auto pan
 Flip
 Reset
 Page switch