Q-See QC40198 - Manual (Page 41)

NAVIGATION AND CONTROLS
QC40198 User Manual
32 | P a g e
4.4.3.3 Priority
Note: The activate snapshot setting takes priority over the schedule snapshot setting. If you have enabled both
types of settings at the same time, the system will activate the “activate snapshot” setting when an alarm
occurs automatically.
4.4.4 Image FTP
In Network interface, you can set FTP server information. Enable FTP function and then click save button. See
Figure 4-19.
Boot up corresponding FTP server.
Enable schedule snapshot (Chapter 4.4.3.1) or activate snapshot (Chapter 4.4.3.2) first, now system can
upload the image file to the FTP server.
Figure 4-19
4.5 Motion Detection
4.5.1 Go to Detect Menu
In the main menu, click Setting, then Detect to obtain the motion detection interface illustrated in Figure 4-20.
The three detection modes available are motion detection, video loss and camera masking.
4.5.2 Motion Detect
Detection menu is illustrated below in Figure 4-20:
Figure 4-20
Please input the
corresponding information
here, if you just uploaded the
image FTP.