D-Link DI-1162 - Manual (Page 94)

DI-1162 Remote Access Router
84 Configuration and Management
Dynamic NAT
This screen (below) is how the NAT IP Pool appears, if Dynamic
NAT was chosen for the Translation Mode parameter. Each entry, in
this configuration, can be used to map multiple, contiguous global
addresses and local addresses to each other.
The parameters are described below:
•
Global IP – an IP Address that is globally unique and valid on the
Internet. It is the base, global address for the global addresses that
will be recognized by the interface in the Global Interface
parameter.
•
Range – this is the range of contiguous, global addresses above
(and including) the base Global IP.
•
Local IP – an IP Address that is only used in the stub domain
since it is not unique. It is the base, local address for the local
addresses that will be recognized by the interface in the Local
Interface parameter.