D-Link DI-1162 User Manual

Page 33

DI-1162 Remote Access Router

Installation

♦

From the Main Menu choose

Advanced Functions

Remote Access Configuration, Remote

Network Profile

and press in the first empty

field.

♦

Set the Direction to IN, OUT or BOTH.

♦

Enter a Name and Password used to establish Incoming and/or

Outgoing connections (if the remote site uses PAP or CHAP).

♦

Configure the other settings shown in this window.

♦

Change the State to

Enable

♦

Please refer to the Configuration and Management section of

this manual for more detailed information regarding the
settings in this screen.

♦

Position the cursor on the

Save

option at the bottom of the

screen and press to save the new setting.

♦

Choose Exit in the sub-menus to return to the Main Menu.

7. Define a WAN port for a leased line connection.

♦

There are only three steps that need to be done to configure a

WAN port for using a leased line and they have already been
done. They are numbers 1, 2 and 3; enabling the WAN port in
the

Interface Configuration

sub-menu, configuring

the

Protocol

setting to a synchronous mode, and

assigning an IP Address to the WAN port in the

Network

Configuration

submenu. Remember to save any

submenu screens in which you have made changes.

Choose LOGOFF from the Main Menu